|
| 高光成型專用模具控溫 |
|
|
|
||||||||||||||||||||||||||||||
 添加到收藏夾
 點擊發郵件咨詢
 舉報此信息
 收藏到用戶中心
|
| 聯系我時，請說明在東北制造網上看到的，謝謝！ |
|
|||
RHCM高光過熱水模溫控制機 RHCM superheated water high-gloss traceless injection mould 急速升降模溫技術 Technology of quick rising and drop of mold temperature
傳統注塑模具溫度控制的不足之處如下 Disadvantages of the traditional temperature control technology for injection molds: 無法滿足高光注塑中快速升溫及快速降溫的需要。 The need of high-gloss injection molding for quick temperature rising and drop cannot be met. 升溫幅度較小，制品表面的溶接痕只能得到減輕而無法消除。 The margin of temperature rising is very small. As a result, the welding traces on product surfaces can be alleviated rather than removed thoroughly. 由于塑料硬度越高，流動性越差。因此采用此種工藝，制品表面的硬度只能達到HB級，無法滿足實際使用需要。 Due to the great hardness and poor fluidity of plastics, this technology can only make the surface hardness of a product grade HB, failing to meet the actual requirements of application. 模具升溫時受熱膨脹，降溫時又會收縮，使鎖模力很不穩定。 Due to the mold’s expansion when in temperature rising and its shrinkage when in temperature drop, the clamping force is quite unstable. 容易造成制品打不滿，燒焦、內應力大等各種缺陷。 Thus, the products are easy to suffer from short molding, scorching, excessive internal stress and other defects.
|
| 最新商情 | 在這顯示|更多 |
| 最新展會 |
| 活躍企業 | 更多 |
| 網站首頁 - 關于我們 - 使用協議 - 免責條款 - 版權隱私 - 網站地圖 - 友情鏈接 - 廣告服務 - 會員服務 - 免費注冊 - 聯系方式 | ||||||||
| 問題請通過在線提問反饋 | 在線客戶QQ：105452034 | 收費會員及廣告咨詢電話13332201705 技術支持：遼寧衡駿節能科技有限公司 | ||||||||
| Copyright 2007- dbzz.net All Rights Reserved 東北制造網(東北地區唯一制造業網上平臺) 版權所有 遼ICP備2021008091號 遼公網安備21021702000105 | ||||||||
| 為獲得最佳瀏覽效果，建議使用IE7以上，或Firefox7以上瀏覽器 | ||||||||
|
