久久国产自偷自免费一区100-久久国产自偷自偷免-久久国产综合精品欧美-久久国内精品自在自线400部o-久久国内精品自在自线观看

產品型號：LBS-005

產品名稱：觸摸密碼鎖

詳細說明:

功能特點：
1.出廠密碼（12345678）管理碼
2.客密碼開關箱使用方法：在開鎖狀態下，輸入4—10位密碼按“鑰匙”鍵即可關門，輸入您前面的正確密碼即可開鎖。
3.一次性密碼：如門鎖在使用過程中忘記開門密碼和管理碼無法開門時，可將鎖上的序列號發到本公司獲取一次性密碼，此密碼在使用一次后自動失效。
4.低電壓報警提示：當電壓變低到2.4V以下，輸入有效密碼后，蜂鳴器響五聲開門，在第一次低電壓報警后，門鎖大約可以使用100周期（其中前50次為短響，后50次聲音較長），請在低電壓報警后盡快更換電池。
5.防撬報警：當門鎖處于關閉狀態時，若鎖舌被人為壓進去，門鎖會發出60秒的報警聲，輸入正確的密碼即可停止報警。
6.操作錯誤提示：無效操作時蜂鳴器短響三聲。
7.恢復到出廠設置：按主板后的按鍵3秒鐘，蜂鳴器長響一聲，鎖舌縮回去管理碼就恢復到出廠時的密碼（12345678)

技術參數：
1.供電方式：3VCR123A電池
2.低電壓報警：報警后可開關100次以上。
3.靜態功耗：＜50mA
4.動態功耗：＞200mA
5.密碼位數：客密碼4—10位，管理碼6—10位。

Details:

Features:
1. default password (12345678) Management Code
2. off the password switch box to use: unlocked, enter 4-10 digit password at the "key" button closed, enter your correct password to unlock the front.
3. one-time password: If you forget to lock the door using the password and the process management code can not open the door, locked the serial number can be sent to the Company for a one-time password, which automatically expire after one use.
4. Low voltage alarm: When the voltage is low to 2.4V below, enter a valid password, open the door buzzer pentatonic, the first low-voltage alarm, door lock you can use about 100 cycles (of which the first 50 times as short beeps sound after 50 long), in the low voltage alarm as soon as replacement batteries.
5. Tamper alarm: When the door is closed, if the bolt is pressed into the man-made, locks will be issued a 60-second alarm sound, enter true password to stop the alarm.
6. Operation error: invalid operation buzzer short three beeps.
7. back to the factory settings: Press the button for 3 seconds after the motherboard, buzzer sounds for a long, latch retracted to manage code on back to the factory password (912 345 678)

Technical parameters:
1. Power Supply: 3VCR123A battery
2. Low voltage alarm: the alarm can switch more than 100 times.
3. Static power consumption: <50mA
4. Dynamic Power:> 200mA
5.digit password: guest password 4-10 bit, 6-10 bit managed code.